I have a fondness for old wooden boxes, cigar boxes especially. My favorite thing to do with them is to convert them to pencil boxes. Not just an empty box in which to toss pencils into, but a box with pull out trays that hold the pencils in elastic, separating them and thus keeping them safe. I like to do something similar with nylon covered CD wallets and similar type cases. It's fun to create something, rewarding too, especially when I can do it for a lot less that I can buying similar items from eBay.
Some time ago I was gifted a broken down wooden cigar box. The top was split and the sides had come loose and the bottom was split. Both the hinges and clasp were in bad shape as well. So I glued the box back together intending to make a pencil box out of it. I replaced the clasp, but really wasn't happy with it. But I decided to go ahead and make the inserts that hold the pencils. The first incarnation were 2 panels that fit inside the bottom of the box that held 13 pencils each. They were made of corrugated cardboard, 1 ply thick, black cloth and some black elastic. This is how the box stayed for months. But I was never very happy with it.
The second incarnation came about when I bought some cow print fabric that I intended to use to cover some panels for another project. I used some translucent plastic sticky back shelf lining material as a template and traced out the cow print pattern onto it then cut it out with an X-acto knife. I then painted the box flat white. Once it had dried I placed the template onto the box and spray painted the black patches using flat black paint. Once it had dried I sprayed it with a gloss clear finish. The gloss finish soon was covered by a clear flat finish. I replaced the brass hinges and clasp with stainless steel ones. upgrading both as I did. The inserts remained the same until recently.
The third incarnation of the box occurred a few days go. I decided to remake the panels and cover them with the cow print fabric and to use thin round elastic instead of 3/4" elastic. But for some reason I cut the cardboard just a tad to little leaving the panels a bit loose inside the box. This is on no real consequence because the panels both fit into the bottom of the box. The box holds 24 pencils.
To make removing the panels easier I attached a strip of double folded black satin 1/2" ribbon to act as a pull. The bottom of the top panel is backed by a sheet of craft foam sheeting. This protects the pencils beneath the top tray! The bottom tray is backed by a thin sheet of card stock. Since there is nothing to protect beneath it, this is all that is necessary.
However. I was dissatisfied with the loss of 2 pencil spaces so on the last incarnation I redid the existing panels so now each panel holds 13 pencils for a total of 26. (Not shown).It was easy converting the cigar box to a pencil display box and a lot of fun to boot! All you need is a wooden box, a few materials, a few tools, time, and enough skill to carry out the project!
If you are interested in making your own pencil display box send me an email asking for the instructions.
Posts
